Tuesday, 24 May 2016

VELOCITY KERNEL (64-BIT) v11.2 FOR YU YUREKA/YUREKA PLUS

ChangeLog

  1. Switched to the latest sources released by CyanogenMod i.e., the Nightly one. *NEW
  2. Merged the latest CM updates into the source. *NEW
  3. Improved Hardware CRC32 algorithm for ARMv8 (faster than the normal one).
  4. Backported zRAM from Linux 4.1. *NEW
  5. Backported zsmAlloc from Linux 4.1. *NEW
  6. BUG-Fixes and Improvements to zBud and zPool. *NEW
  7. Tons of BUG-Fixes and Improvements to F2FS. *NEW
  8. Tons of BUG-Fixes and Improvements to Interactive Governor. *NEW
  9. Improvements to GPU-Frequency Mechanism (should improve Gaming-Performance). *NEW
  10. Tons of BUG-Fixes and Improvements to Vibration Module and Intensity Control. *NEW
  11. BUG-Fixes and Improvements to Colour Enhancement. *NEW
  12. Support for Qualcomm Sunlight Readability Enhancement (SRE). *NEW
  13. Fixed DT2W on AOSParadox ROM (use the OLD type of v11.2 with this ROM as it is using old sources).
  14. Full Support for Offline Gestures. *NEW
  15. Removed Hack from ThunderCharge (Now, you need to use ThunderZap App to control Charge Rate. This is done because I believe that the hack broke the Charge Rate Toggle.). *NEW
  16. Support for using all 8 cores while booting (should improve Boot-Time).
  17. Raised the default Max. Charging Current from 900mAh to 1000mAh (should improve Charging-Time). *NEW
  18. Minor BUG-Fixes and Improvements.       


NOTE---

Only AutoSMP HotPlug is there because---

1. it can replicate the behaviour of AluCard HotPlug if we set Max. Cores to 4 and set the Max. Freq. of big Cluster to 1113MHz
2. it can replicate the behaviour of ClusterPlug if we set the Max. Cores to 4
3. it can act as a normal HotPlug switching cores online/offline based on CPU-Load and User-Preferences


Download Link--- 
Now, I have switched to a better Ad-Supported Website for Downloads. All you need to do now is wait for 5 seconds and then click on Skip this Ad button which will take you directly to the download page reaching which you are to press the blue download button to start the download. 

For AOSParadox and MM ROMs with Offline Gesture Support---
http://sh.st/AuoUS

For LP ROMs and those MM ROMs in which you want DT2W to work---
http://sh.st/AiXDP 

Only for MM ROMs and that too only for those which are based on the latest sources i.e., the Nightly one--- 
http://sh.st/AeppQ 



Recommended Settings---
Click Here!

ENJOY!!! ;)

44 comments:

  1. WHAT ARE RECOMMENDED SETTING FOR THIS VERSION.

    ReplyDelete
    Replies
    1. Link for Recommended Settings is added above! :)

      Delete
  2. I'll switch to AndroidFileHost as soon as they solve their upload BUG.

    ReplyDelete
  3. Is it Lollipop or MM? If Lollipop, then is it 5.1.1 or 5.0.2?
    If it is 5.0.2, the sorry, my kernel doesn't support this much old version but if it is 5.1.1, then flash the second one i.e., v11.2_OLD_DT2W BUILD.

    ReplyDelete
  4. Links are not working

    ReplyDelete
    Replies
    1. They are working. Try UC Browser or use PC. ;)

      Delete
  5. Im in cm13 latest nightly which one should i download

    ReplyDelete
  6. M using miui rom by anna bathina latest rom is it compatiable with it

    ReplyDelete
    Replies
    1. This kernel is mainly meant for CM based ROMs and not ported ROMs. Still, for MIUI which is based on Lollipop, you should use the second one i.e., v11.2_DT2W.

      Delete
  7. I am currently on latest crdroid based on marshmallow or 13, which one should I choose?

    ReplyDelete
  8. Hey bro I am using kernel with mokee but it is not booting

    ReplyDelete
    Replies
    1. Is Mokee a Marshmallow ROM or a Lollipop one?
      If it is Marshmallow, then flash the third one but if it is Lollipop, then flash the second one.

      Delete
  9. Hey bro I am using kernel with mokee but it is not booting

    ReplyDelete
    Replies
    1. Which BUILD did you flash and is Mokee a Lollipop ROM?

      Delete
  10. Which to use for umang's ressurection remix rom 31 may 2016 build

    ReplyDelete
  11. I'm using mokee mm rom nightly which one can I flash

    ReplyDelete
    Replies
    1. Try the third first. If it doesn't boot, then try the second one. Make sure to make backup of system and boot via TWRP before flashing the kernel.

      Delete
  12. Could you please provide me another link?when I download from devhost,the file size is below 1MB...I am using CM 13 nightly 06/03 build..

    ReplyDelete
    Replies
    1. Download from UC Browser or try from PC. AFH is really buggy these days so I am not using it.

      Delete
  13. Link not working update plz

    ReplyDelete
    Replies
    1. Download from UC Browser or try from PC. AFH is really buggy these days so I am not using it. Further, you need to click the blue download button.

      Delete
  14. in I/O Scheduler there is no option BFQ but cfq option is there.
    what to do..??

    ReplyDelete
  15. I am in AOSParadox 20160521 build and I want to know which file has to be downloaded and flashed. Coz I dont know whether the rom is based on latest sources or old sources or nightly

    ReplyDelete
  16. i am on tipsy os which to flash

    ReplyDelete
  17. I'm using XOSP 6.1 which one to download

    ReplyDelete
  18. Im in RR5.6.8 amd flashed velocity 11.2third link and the camera is not working it happened it yureka as well as yureka plus what to do ?

    ReplyDelete
    Replies
    1. Download the latest version of ROM and download the third one.

      Delete
    2. Even with the latest version of ROM, camera isn't working.

      Delete
  19. I am using Resurrection remix on yureka marshmallow. Which link i should download and what are the recommended settings?

    ReplyDelete
    Replies
    1. The third one. Recommended Settings link is given above in the post.

      Delete
  20. Bro my phone is YU yureka based on CM 12.1. I think I have flashed the one abv said by you...
    .also I have a doubt my kernal auditor set to default values after some time can I stop it

    ReplyDelete
  21. Bro my phone is YU yureka based on CM 12.1. I think I have flashed the one abv said by you...
    .also I have a doubt my kernal auditor set to default values after some time can I stop it

    ReplyDelete
  22. This comment has been removed by the author.

    ReplyDelete
  23. i am using cm13 6.0.1 nightly build official but whenever i flash it stucks in the bootloop
    have installed cwm custom recovery and rooted it also

    ReplyDelete
  24. This comment has been removed by the author.

    ReplyDelete
  25. Harrah's Reno Casino & Hotel - Mapyro
    Reno, NV. Distance to McCarran 남원 출장마사지 International 구미 출장안마 Airport. Near 울산광역 출장샵 Harrahs 경기도 출장안마 Reno Casino 파주 출장안마 & Hotel. From: Las Vegas McCarran International Airport.

    ReplyDelete