Tuesday 8 November 2016

Velocity Kernel (3.10.104) v14.0 (64-Bit) for Yu Yureka and Yu Yureka PLUS




Notes---
1. Due to variations in SoC, the Sound Control will work properly at different levels of Volume for different people. For ex, value 5 of Mic Gain may be too loud for some but too low for others. So, you people have to find out the perfect value for yourselves. By the way, value 10 of Mic Gain is known to be the most suitable for every device.
2. In order to avoid conflicts, I have added a failsafe regarding Core-Control and Core-HotPlug Mehcanism. This means, out of AutoSMP, State Helper and Core Control, only one can be used at a time. Even if you try to enable each one of them simultanouesly, they won't get enabled. I have done this to avoid malfunctions.
3. After you manually changing the CPU Governor or Frequency, all the Cores will come online even if any HotPlug is enabled. So, you just need to re-enable any HotPlugs you were using in order to disable the Cores again.
4. Currently, AOSParadox ROM and a few other voLTE enabled ROMs too have 100% Core-Load Issue. This leads to more Heat-Generation. Further, High CPU-Usage makes Charging Time a lot slower as well as decreases the Battery-Life by a large margin. Until this BUG is fixed, nothing much can be done to improve upon these areas.
5. Sometimes, enabling Core Control may cause the ROM to hang. In this case, rebooting via ROM doesn't work. So, just press and hold Power button until the phone restarts.
6. When Core 0 gets disabled (due to Core Control or State Helper HotPlug), Adiutor fails to get Frequency and Governor information and hence shows 0MHz in Frequency Panel and Blank Space in Governor Panel. This is normal. In this case, if you need to change Governor or Frequency, then you need to disable Core Control or State Helper HotPlug as the case may be. After this, force close Adiutor and then re-open it. This will make Adiutor get CPU information again.



Download Links---
                For all Lollipop (5.1.1) and Yu-OS ROMs---
                     sh.st/8XbVE
  
                For Marshmallow (6.0.x) ROMs only---
                     sh.st/8Xvdn

                For AOSParadox 3.x (6.0.x) ROM only---
                     sh.st/8Xx4u
                                  


Recommended Settings---
http://shoaib0597.blogspot.com/p/recommended-settings-note-use-kernel.html


                                                               ENJOY!!!
at 20 comments:

Monday 22 August 2016

Velocity Kernel (64-BIT) v13.0 for Yu Yureka and Yureka PLUS

    

ChangeLogs---

  • Merged Latest CyanogenMod Updates into Source.
  • Switched back to UberTC 4.9.4 for perfect stability and compability with CM Source (CM uses GCC-4 too).
  • Fixed Bootloop/Random Reboots occuring for a few devices.
  • Removed FauxSound v3.4 as it was causing Low-Volume-in-Call issue for a few devices. It was also not a perfect port as the Negative Values didn't work in it.
  • Removed IntelliThermal v3.0 as it wasn't as efficient on our Architecture as it was supposed to be.
  • Removed all HotPlugs (this suits the New Task-Scheduler Features).
  • SELinux is now set to Enforcing (apps such as Kernel Adiutor-MOD can change the status as per User-Preference).
  • Enabled HMP-Aware and Power-Aware Features of Task-Scheduler.
    (Now, the Task-Scheduler will observe per-Core Power Consumption instead of per-Cluster i.e., the tasks will be alloted to those Cores which consume the least amount of Power. Thus, this will allow certain Cores to do more tasks than other Cores based on their Efficiency leading to significant Power-Savings.)
  • Force BackGround Processes to run on LITTLE Cluster instead of big Cluster (this will help Save significant Power without reducing Performance).
  • Improved Support for PowerSuspend Driver.
  • Port Adreno IDLER Correctly.
    (Earlier implementations of Adreno IDLER for our CM's source have been inefficient and partially working. However, after spending a good amount of time, I, Shoaib, have managed to alter the Codes correctly in order to have perfect compatibility. You can observe this by Disabling Adreno IDLER because as soon as you do that, the GPU-Frequency returns to the stock behaviour which means that IDLER now can be Disabled and Enabled properly.)
  • Alter GPU-Frequencies to Save Power---
    • Replace 220MHz with 160MHz (IDLE-Frequency) to save Power.
    • Replace 465MHz with 400MHz to save Power without negative impact on Performance.
    • Replace 400MHz with 310MHz to save Power.
  • Alter CPU-Frequencies to bring Uniformity.
    (Earlier, the Frequencies of both the Clusters weren't uniform. For ex: big Cluster had a Frequency of 400MHz which was missing in LITTLE Cluster and LITTLE Cluster had a Frequency of 998MHz which was missing in big Cluster. This difference in Frequencies caused a few problems for those Drivers which weren't made for big.LITTLE architecture. For ex: a Thermal Driver may not be able to throttle-down the Frequencies of both the Clusters properly as it will fail finding the same Frequency in both the Clusters i.e., if the Thermal Driver tries to reduce the Frequency to 400MHz, then the big CLuster will be throttled-down properly but the same will not be the case with the LITTLE Cluster as it doesn't contains the mentioned Frequency.)
  • Overclocked the big Cluster to 1.6GHz and LITTLE Cluster to 1.2GHz (tested to work on all revisions).
  • Updated WiFi Driver to LA.BR.1.2.6_rb1.15.
  • Updated Offline Gestures (thanks to zwliew).
    (These are now included in CM. You all should see these in upcoming Nightlies. This may break Gesture Functions with other ROMs which are yet to include this.)
  • Fixed Battery-Saver and Per-App Profiles Feature disappearing when flashing this Kernel (now, these options won't get removed from Battery Section of any ROM).

Now, the Highlights of v13.0 i.e., the Unique Features that are introduced to Yu-Forums by Velocity Kernel only---

1. Introduce a Totally New and Revamped Sound Control---
(Since FauxSound had a few issues, I removed it but then worked hard to port Franco's Sound Control to our MSM8916 architecture and fortunately my hard-work paid off. This means that now, the Sound Control will work for everyone without any BUGs such as Low-Mic Volume. Further, even Negative Values work too now.)

2. Introduce a Totally New and Revamped Thermal Driver---
The main problem with Yu-Devices is that their heat-management isn't as efficient as it should have been. This problem prevented us from utilizing the SD615's full potential. However, this shouldn't be the case now as I have ported Franco's Thermal Driver for Yu-Devices. I can't even remember how many Test BUILDs I compiled just to make this feature work in the perfect manner on our Yu-Devices. Fortunately, my hard-work paid off. This is the Best Thermal Driver that the Yu-Forums has ever witnessed.

Explaination of the Working of Franco's Thermal Driver---
There are 4 Temperature Limits which are user-controllable. Further, each of these 4 Limits have a User-Controllable Frequency. As soon as these Limits are crossed, the Thermal Driver reduces the Speed of CPU to the User-Defined one. So, now, every person can use the phone in a way he likes. For ex, Gamers can get the Maximum Performance they can squeeze out of SD615 while Casual Users can make their phones' Temperature decrease as much as the Hardware allows without much Performance Degradation. This is, by far, the best solution to the Heating Problem of Yu-Devices.

So, here it is. The stable and the best version of Velocity till date. :)



Notes---
1. Only for Marshmallow ROMs based on the latest Sources of CyanogenMod.

2. It is VERY important that you all use this Kernel Adiutor (it is an enhanced version of the Play Store one and is necessary to use all the functions of this kernel)---
https://github.com/yoinx/kernel_adiutor/raw/master/download/app/app-release.apk
Developers of this Kernel Adiutor---
Yoinx, David 617, Spezi77, Grarak, Bender80
Make sure to uninstall your current Kernel Adiutor first before installing this one.


3. WiFi not working? Try the following solutions---
    a. Check whether there is more than 25MB of space left in system partition or not. If not, then uninstall some apps to make space and then re-flash the kernel but if there is enough space free in system already, then skip to the next step.
    b. Install busybox in your ROM (there is an app available on Play Store which installs busybox) and then re-flash the kernel.

Recommended Settings---
http://shoaib0597.blogspot.in/p/recommended-settings-note-use-kernel.html


Download Link (Monetized)---
I spend hours working on this kernel. Appreciate my work and boost my motivation by using this Link only to Download the kernel.
http://sh.st/CAt6v



Download Link (Direct)---
https://www.androidfilehost.com/?fid=24686681827312407



ENJOY!!!

at 6 comments:

Friday 24 June 2016

Velocity Kernel (64-BIT) v12.0 for Yu Yureka/Yureka PLUS

ChangeLog---

  1. Updated Linux Kernel Version to the latest one i.e., 3.10.102!
    (This is one of the biggest change in Velocity Kernel since the start. It took me weeks to fix all the BUGs, mismerges and above all, I had to fix the booting of the kernel which took much of my time. However, I managed to do that and here it is, the TRUE update to 3.10.102. It is TRUE in the sense that I have included almost all commits directly from Linux, over 2,400 commits! This update of Linux contains thousands of BUG-Fixes and Improvements. Until now, no other kernel for Yureka/Yureka PLUS has this update. However, I have worked for this cause. So, to all Yu-Developers, check the thread link given in the end of the post.). *NEW
  2. Merged latest CM updates into Velocity's source.
  3. Compiled the kernel with -O2 Flag optimizations (should improve performance such as app-opening speed, etc.). *NEW
  4. Reduced Debugging a little bit (should improve Performance and Battery-Life both). *NEW
  5. Added Gentle Fair Sleepers Toggle (Disabled by default to Save Power).
  6. Added ElementalX Governor v2.0 (a Balanced Governor inclined towards Battery). *NEW
  7. Added LionFish Governor (a Battery-Oriented Governor).
  8. Removed AluCard Governor as Darkness saves Battery the most. Interactive is a very balanced Governor. It can replicate AluCard's behaviour.
  9. Re-included ThunderCharge hack to make it compatible with Adiutor (ThunderZap App is no longer required).
  10. Support for DTS-Eagle Sound Effects.
  11. Support for updated version of FIOPS I/O Scheduler.
  12. Support for latest version of Frandom RNG Driver (improves performance). *NEW
  13. Support for a 50MHz Power-Saving Frequency for GPU (should save Power without any noticeable side-effects).
  14. Support for Adreno IDLER in order to utilize the 50MHz Power-Saving Frequency properly.
  15. Support for latest version of Dynamic FSync i.e., v2.0 (may improve performance at the cost of IDLE-Battery Drain, hence Toggable).
  16. Support for zRAM (LZ4-Compression), zsmAlloc, Swap, zSwap, FrontCache and CleanCache Drivers to improve memory management and performance. *NEW
  17. Updated OnDemand CPU Governor (contains BUG-Fixes and Improvements).
  18. Updated kCAL Colour Control Driver to the latest version. *NEW
  19. Updated WiFi Driver to 1.14 branch of CAF source. *NEW
  20. Updated Uber ToolChain from 4.9.4 to 5.3.x (should improve and optimize the kernel further). *NEW
  21. Updated CPU-Boost to the latest version (includes HotPlug Boost and WakeUp Boost, thanks to Pranav Vashi). *NEW
  22. BUG-Fixes and Improvements to CPU-Frequency Mechanism of the kernel. *NEW
  23. BUG-Fixes and Improvements to GPU-Frequency Mechanism of the kernel. *NEW
  24. BUG-Fixes and Improvements to Scheduler (now, the scheduler is smarter and is tuned to save more Power). *NEW
  25. BUG-Fixes and Improvements to Video Drivers and Display. *NEW
  26. BUG-Fix to Radio Hardware (may Save Power).
  27. BUG-Fixes and Improvements to Audio and Sound. *NEW
  28. BUG-Fixes and Improvements to zRAM and zsmAlloc (Page-Table Mapping). *NEW
  29. BUG-Fixes and Improvements to Thermal Engine. *NEW
  30. BUG-Fixes and Improvements to SELinux. *NEW
  31. BUG-Fixes and Improvements to Crypto APIs. *NEW
  32. BUG-Fixes and Improvements to Networking components specially cubic TCP-Algorithm. *NEW
  33. Proper Support for Faux Sound Control v3.4 (may improve Call-Voice Quality).
  34. Proper Support for IntelliThermal v3.0 (full control to users to manage heat based on their usage).
  35. Special Tweaks to enhance FileSystem Performance. *NEW
  36. Special Tweaks to reduce the usage of CPU in idle. *NEW
  37. System-Wide Tweaks and Enhancements to decrease Power-Consumption and encourage Aggressive Sleep. *NEW
  38. Tons of Code-Optimizations for a boost in performance. *NEW
  39. Improvements and Enhancements to Offline Gestures (added functionality such as assigning of custom apps to open when a gesture is drawn but this needs to be implemented in ROM too, thanks to Pranav Vashi). *NEW
  40. Minor BUG-Fixes and Improvements to almost every aspect of the kernel.


Notes---
1. The OLD variant doesn't supports the following features---
    a. Linux Base Update
    b. UberTC ToolChain Update
    c. Offline Gestures
2. WiFi not working? Try the following solutions---
    a. Check whether there is more than 10MB of space left in system partition or not. If not, then uninstall some apps to make space and then re-flash the kernel but if there is enough space free in system already, then skip to the next step.
    b. Install busybox in your ROM (there is an app available on Play Store which installs busybox) and then re-flash the kernel.


 Download Links---
(Appreciate my work, avoid using, sharing and mirroring the direct link.)


For Lollipop and OLD-Source Marshmallow ROMs only---
http://sh.st/DJNwX

For New-Source Marshmallow ROMs only---
http://sh.st/DJNus


Recommended Settings---
http://shoaib0597.blogspot.in/p/recommended-settings-note-use-kernel.html


ENJOY!!! 
at 9 comments:

Sunday 29 May 2016

VELOCITY KERNEL (32-BIT) v4.1 FOR YU YUNIQUE

ChangeLog—
  1. Merged the latest CM updates into the source. *NEW
  2. Backported zRAM from Linux 4.1. *NEW
  3. Backported zsmAlloc from Linux 4.1. *NEW
  4. Improved support for LZ4 Compression Algroithm. *NEW
  5. Tons of BUG-Fixes and Improvements to F2FS.
  6. Tons of BUG-Fixes and Improvements to Interactive Governor.
  7. Improvements to GPU-Frequency Mechanism (should improve Gaming-Performance).
  8. Tons of BUG-Fixes and Improvements to Vibration Module and Intensity Control.
  9. Support for BAM_DMUX Fast Shutdown (may improve Battery-Life). *NEW
  10. BUG-Fixes and Optimizations to Task-Scheduler
  11. Overclocked CPU to 1.4GHz.
  12. Overclocked GPU to 465MHz.
  13. BUG-Fixes and Optimizations to LiveDisplay and Sound.
  14. BUG-Fixes and Improvements to many other components.  

Download Link--- 
Now, I have switched to a better Ad-Supported Website for Downloads. All you need to do now is wait for 5 seconds and then click on Skip this Ad button which will take you directly to the download page reaching which you are to press the blue download button to start the download. 
http://sh.st/ARZ3M


Recommended Settings---
I DON'T OWN the device so honestly I can’t tell what’s ideal. You people have to experiment yourselves. :)
However, I can explain some of the features. ;)
1. Governors---
Balanced Performance---Interactive
Balanced Battery---AluCard
Pure Battery---Darkness
2. HotPlugs---
Don't use any. However, if you want a little bit more Battery-Life, then you can make your device a dual-core one by setting Min. and Max. Cores to 2 and disabling "Screen Off Core to 1" option leaving everything else at default values.
3. I/O Scheduler---
BFQ is best. So, use it for both Internal and External Storage.
4. Misc---
Enable Schedule WorkQueue Toggle in CPU TAB.
If you're a casual user and want more Battery-Life, then set the Max. CPU Freq. to 998MHz.

FAQs---
1. In order to reset settings to default, just Disable the Apply On Boot option of the particular TAB in Kernel Adiutor and reboot the phone. :)

ENJOY!!! ;)     
at 4 comments:

Wednesday 25 May 2016

VELOCITY KERNEL (64-BIT) v11.3 FOR YU YUPHORIA

ChangeLog—

  1. Merged the latest CM updates into the source. *NEW
  2. Improved Hardware CRC32 algorithm for ARMv8 (faster than the normal one).
  3. Backported zRAM from Linux 4.1. *NEW
  4. Backported zsmAlloc from Linux 4.1. *NEW
  5. BUG-Fixes and Improvements to zBud and zPool. *NEW
  6. Tons of BUG-Fixes and Improvements to F2FS. *NEW
  7. Tons of BUG-Fixes and Improvements to Interactive Governor. *NEW
  8. Improvements to GPU-Frequency Mechanism (should improve Gaming-Performance). *NEW
  9. Tons of BUG-Fixes and Improvements to Vibration Module and Intensity Control. *NEW
  10. Built a new script to fix DT2W.
  11. Included all changes done by NeoBuddy in order to have full Support for Offline Gestures. *NEW
  12. Overclocked CPU to 1.4GHz.
  13. Support for BAM_DMUX Fast Shutdown (may improve Battery-Life).
  14. Minor BUG-Fixes and Improvements.  

Download Link--- 
Now, I have switched to a better Ad-Supported Website for Downloads. All you need to do now is wait for 5 seconds and then click on Skip this Ad button which will take you directly to the download page reaching which you are to press the blue download button to start the download. 
http://sh.st/Ao0SU



Fix for DT2W---
Download the fix from the link below and flash it via TWRP. (thanks to jyoti.id for creating a flashable .zip for this fix)
Download Link---
http://sh.st/Aj4gP





ENJOY!!! ;)     
at 18 comments:

Tuesday 24 May 2016

VELOCITY KERNEL (64-BIT) v11.2 FOR YU YUREKA/YUREKA PLUS

ChangeLog—

  1. Switched to the latest sources released by CyanogenMod i.e., the Nightly one. *NEW
  2. Merged the latest CM updates into the source. *NEW
  3. Improved Hardware CRC32 algorithm for ARMv8 (faster than the normal one).
  4. Backported zRAM from Linux 4.1. *NEW
  5. Backported zsmAlloc from Linux 4.1. *NEW
  6. BUG-Fixes and Improvements to zBud and zPool. *NEW
  7. Tons of BUG-Fixes and Improvements to F2FS. *NEW
  8. Tons of BUG-Fixes and Improvements to Interactive Governor. *NEW
  9. Improvements to GPU-Frequency Mechanism (should improve Gaming-Performance). *NEW
  10. Tons of BUG-Fixes and Improvements to Vibration Module and Intensity Control. *NEW
  11. BUG-Fixes and Improvements to Colour Enhancement. *NEW
  12. Support for Qualcomm Sunlight Readability Enhancement (SRE). *NEW
  13. Fixed DT2W on AOSParadox ROM (use the OLD type of v11.2 with this ROM as it is using old sources).
  14. Full Support for Offline Gestures. *NEW
  15. Removed Hack from ThunderCharge (Now, you need to use ThunderZap App to control Charge Rate. This is done because I believe that the hack broke the Charge Rate Toggle.). *NEW
  16. Support for using all 8 cores while booting (should improve Boot-Time).
  17. Raised the default Max. Charging Current from 900mAh to 1000mAh (should improve Charging-Time). *NEW
  18. Minor BUG-Fixes and Improvements.       


NOTE---

 Only AutoSMP HotPlug is there because---

1. it can replicate the behaviour of AluCard HotPlug if we set Max. Cores to 4 and set the Max. Freq. of big Cluster to 1113MHz
2. it can replicate the behaviour of ClusterPlug if we set the Max. Cores to 4
3. it can act as a normal HotPlug switching cores online/offline based on CPU-Load and User-Preferences


Download Link--- 
Now, I have switched to a better Ad-Supported Website for Downloads. All you need to do now is wait for 5 seconds and then click on Skip this Ad button which will take you directly to the download page reaching which you are to press the blue download button to start the download. 

For AOSParadox and MM ROMs with Offline Gesture Support---
http://sh.st/AuoUS

For LP ROMs and those MM ROMs in which you want DT2W to work---
http://sh.st/AiXDP 

Only for MM ROMs and that too only for those which are based on the latest sources i.e., the Nightly one--- 
http://sh.st/AeppQ 



Recommended Settings---
Click Here!

 ENJOY!!! ;)
at 45 comments:

Monday 16 May 2016

VELOCITY KERNEL (64-BIT) V11.2 FOR YU YUPHORIA

ChangeLog—

  1. Re-Built from scratch i.e., the base of the kernel has been revised and improved.
  2. Switched to the latest sources provided by CM i.e., the Nightly one (contains improvements to WiFi, Display, Sound, etc.).
  3. Full Support for F2FS (up-to-date F2FS Driver).
  4. Full Support for KEXEC with HARDBOOT.
  5. Improved the LiveDisplay Driver (several BUG-Fixes and improvements).
  6. Improved the BFQ Scheduler with support for Hierarchical Scheduling.
  7. Support for Offline Gestures (need to be implemented in the ROM too).
  8. Minor BUG-Fixes and Improvements.

Download Link (Monetized. If you feel my work is appreciable and want to boost my motivation, then please use this link. It is simple, just follow the instructions.😉 )—
Instructions—
  1. As soon as you click this link, a page will open with a “Skip this Ad” button at the top-right corner (shows up after a count of 5 seconds).
  2. You need to click that button which opens a new window.
  3. Now, the main thing is to close that new window before it fully loads as only that new window leads to more ads.

Download Link (Direct)—

Note—
For DT2W, the old script is still required. Although, I can enable it by default but then you people won’t be able to disable it. So, the functionality via the script is better.
Recommended Settings—
I don’t own the device so honestly I can’t tell what’s good. You people have to experiment yourselves.:)

Reason for removal of certain main features—
1. Governors—
Only AluCard and Darkness Governors are there. These both are Battery-Oriented ones and are regarded as the best. For performance, no governor can match the new Interactive Governor.
2. HotPlugs—
Only AutoSMP is there. Since SD410 is a quad-core SoC, too many HotPlugs are unnecessary. Further, AutoSMP is quite good too.
3. Overclock—
I’ll add it later. By the way, the kernel is quite smooth already.😉
at No comments:

VELOCITY KERNEL (64-BIT) V2.0 FOR YU YUTOPIA

ChangeLog—

1. Switched to the latest Marshmallow sources released by Cyanogen.
2. Fixed Boot-Loop finally (Tested by Mohit Makhija).
3. Updated F2Fs to the latest version i.e., v4.4.
4. Support for exFAT FileSystem.
5. Minor BUG-FIxes and Improvements.
Note—
This BUILD is only for Marshmallow based ROMs.

Download Link (Monetized. If you feel my work is appreciable and want to boost my motivation, then please use this link. It is simple, just follow the instructions.😉 )—
Instructions—
  1. As soon as you click this link, a page will open with a “Skip this Ad” button at the top-right corner (shows up after a count of 5 seconds).
  2. You need to click that button which opens a new window.
  3. Now, the main thing is to close that new window before it fully loads as only that new window leads to more ads.

Download Link (Direct)—
at 1 comment:

VELOCITY KERNEL (64-BIT) V11.1 FOR YU YUREKA/YUREKA PLUS

ChangeLog—

  1. Re-Built from scratch i.e., the base of the kernel has been revised and improved.
  2. Switched to a new source (contains improvements to WiFi, Display, Sound, etc.).
  3. Improved Hardware CRC32 algorithm for ARMv8 (faster than the normal one).
  4. Full Support for F2FS (up-to-date F2FS Driver).
  5. Full Support for KEXEC with HARDBOOT.
  6. Improved the LiveDisplay Driver (several BUG-Fixes and improvements). *NEW
  7. Full Support for the latest version of Colour Enhancement (a new and improved implementation to make colours look vibrant with more contrast). *NEW
  8. Support for Kernel-CPUSets.
  9. Fixed implementation of C and M Gestures (earlier, there values were swapped i.e., M was C and vice-versa). *NEW
  10. Energy-Efficient and IntelliGent Task Allocation System (more of the tasks will be performed by LITTLE Cluster except for extreme loads such as gaming thereby reducing heat and saving a lot of Battery). *NEW
  11. Improved IDLE-Battery usage (IDLE-Battery Drain should be almost Zero). *NEW
  12. Improved the BFQ Scheduler with support for Hierarchical Scheduling.
  13. System-Wide tweaks to improve the smoothness of kernel.
  14. Fixed Vibration Intensity Control.
  15. Fixed WestWood+ TCP Congestion Algorithm.
  16. Improved compatibility with ROMs i.e., Torch Toggle won’t disappear after flashing the kernel. *NEW
  17. Minor BUG-Fixes and Improvements.

Download Link (Monetized. If you feel my work is appreciable and want to boost my motivation, then please use this link. It is simple, just follow the instructions.😉 )—
Instructions—
  1. As soon as you click this link, a page will open with a “Skip this Ad” button at the top-right corner (shows up after a count of 5 seconds).
  2. You need to click that button which opens a new window.
  3. Now, the main thing is to close that new window before it fully loads as only that new window leads to more ads.

Download Link (Direct)—
Recommended Settings—

Reason for removal of certain main features—
1. Governors—
Only AluCard and Darkness Governors are there. These both are Battery-Oriented ones and are regarded as the best. For performance, no governor can match the new Interactive Governor.
2. HotPlugs—
Only AutoSMP and AluCard HotPlugs are there. AutoSMP can disable the LITTLE cluster completely and AluCard can disable big cluster. So, both of these can perform all the hotplugging tasks.
3. Overclock—
After a lot of testing, I can confidently say that on Yureka, OCs don’t increase performance. In fact, they decrease it. The main reason for this is the heat-issue of SnapDragon 615 processors.
at No comments:
Subscribe to: Posts (Atom)