Tuesday 8 November 2016

Velocity Kernel (3.10.104) v14.0 (64-Bit) for Yu Yureka and Yu Yureka PLUS




Notes---
1. Due to variations in SoC, the Sound Control will work properly at different levels of Volume for different people. For ex, value 5 of Mic Gain may be too loud for some but too low for others. So, you people have to find out the perfect value for yourselves. By the way, value 10 of Mic Gain is known to be the most suitable for every device.
2. In order to avoid conflicts, I have added a failsafe regarding Core-Control and Core-HotPlug Mehcanism. This means, out of AutoSMP, State Helper and Core Control, only one can be used at a time. Even if you try to enable each one of them simultanouesly, they won't get enabled. I have done this to avoid malfunctions.
3. After you manually changing the CPU Governor or Frequency, all the Cores will come online even if any HotPlug is enabled. So, you just need to re-enable any HotPlugs you were using in order to disable the Cores again.
4. Currently, AOSParadox ROM and a few other voLTE enabled ROMs too have 100% Core-Load Issue. This leads to more Heat-Generation. Further, High CPU-Usage makes Charging Time a lot slower as well as decreases the Battery-Life by a large margin. Until this BUG is fixed, nothing much can be done to improve upon these areas.
5. Sometimes, enabling Core Control may cause the ROM to hang. In this case, rebooting via ROM doesn't work. So, just press and hold Power button until the phone restarts.
6. When Core 0 gets disabled (due to Core Control or State Helper HotPlug), Adiutor fails to get Frequency and Governor information and hence shows 0MHz in Frequency Panel and Blank Space in Governor Panel. This is normal. In this case, if you need to change Governor or Frequency, then you need to disable Core Control or State Helper HotPlug as the case may be. After this, force close Adiutor and then re-open it. This will make Adiutor get CPU information again.



Download Links---

                For all Lollipop (5.1.1) and Yu-OS ROMs---
                     sh.st/8XbVE
  
                For Marshmallow (6.0.x) ROMs only---
                     
sh.st/8Xvdn

                For AOSParadox 3.x (6.0.x) ROM only---
                     sh.st/8Xx4u
                                  


Recommended Settings---
http://shoaib0597.blogspot.com/p/recommended-settings-note-use-kernel.html


                                                               ENJOY!!!