VELOCITY KERNEL (32-BIT) v4.1 FOR YU YUNIQUE

ChangeLog—

1. Merged the latest CM updates into the source. *NEW
2. Backported zRAM from Linux 4.1. *NEW
3. Backported zsmAlloc from Linux 4.1. *NEW
4. Improved support for LZ4 Compression Algroithm. *NEW
5. Tons of BUG-Fixes and Improvements to F2FS.
6. Tons of BUG-Fixes and Improvements to Interactive Governor.
7. Improvements to GPU-Frequency Mechanism (should improve Gaming-Performance).
8. Tons of BUG-Fixes and Improvements to Vibration Module and Intensity Control.
9. Support for BAM_DMUX Fast Shutdown (may improve Battery-Life). *NEW
10. BUG-Fixes and Optimizations to Task-Scheduler
11. Overclocked CPU to 1.4GHz.
12. Overclocked GPU to 465MHz.
13. BUG-Fixes and Optimizations to LiveDisplay and Sound.
14. BUG-Fixes and Improvements to many other components.  

Download Link--- 
Now, I have switched to a better Ad-Supported Website for Downloads. All you need to do now is wait for 5 seconds and then click on Skip this Ad button which will take you directly to the download page reaching which you are to press the blue download button to start the download. 
http://sh.st/ARZ3M


Recommended Settings---

I DON'T OWN the device so honestly I can’t tell what’s ideal. You people have to experiment yourselves.

However, I can explain some of the features.

1. Governors---

Balanced Performance---Interactive

Balanced Battery---AluCard

Pure Battery---Darkness

2. HotPlugs---

Don't use any. However, if you want a little bit more Battery-Life, then you can make your device a dual-core one by setting Min. and Max. Cores to 2 and disabling "Screen Off Core to 1" option leaving everything else at default values.

3. I/O Scheduler---

BFQ is best. So, use it for both Internal and External Storage.

4. Misc---

Enable Schedule WorkQueue Toggle in CPU TAB.

If you're a casual user and want more Battery-Life, then set the Max. CPU Freq. to 998MHz.

FAQs---

1. In order to reset settings to default, just Disable the Apply On Boot option of the particular TAB in Kernel Adiutor and reboot the phone.

ENJOY!!! ;)     

VELOCITY KERNEL (64-BIT) v11.3 FOR YU YUPHORIA

ChangeLog—

1. Merged the latest CM updates into the source. *NEW
2. Improved Hardware CRC32 algorithm for ARMv8 (faster than the normal one).
3. Backported zRAM from Linux 4.1. *NEW
4. Backported zsmAlloc from Linux 4.1. *NEW
5. BUG-Fixes and Improvements to zBud and zPool. *NEW
6. Tons of BUG-Fixes and Improvements to F2FS. *NEW
7. Tons of BUG-Fixes and Improvements to Interactive Governor. *NEW
8. Improvements to GPU-Frequency Mechanism (should improve Gaming-Performance). *NEW
9. Tons of BUG-Fixes and Improvements to Vibration Module and Intensity Control. *NEW
10. Built a new script to fix DT2W.
11. Included all changes done by NeoBuddy in order to have full Support for Offline Gestures. *NEW
12. Overclocked CPU to 1.4GHz.
13. Support for BAM_DMUX Fast Shutdown (may improve Battery-Life).
    
14. Minor BUG-Fixes and Improvements.  

Download Link--- 
Now, I have switched to a better Ad-Supported Website for Downloads. All you need to do now is wait for 5 seconds and then click on Skip this Ad button which will take you directly to the download page reaching which you are to press the blue download button to start the download. 
http://sh.st/Ao0SU



Fix for DT2W---
Download the fix from the link below and flash it via TWRP. (thanks to jyoti.id for creating a flashable .zip for this fix)
Download Link---
http://sh.st/Aj4gP





ENJOY!!! ;)     

VELOCITY KERNEL (64-BIT) v11.2 FOR YU YUREKA/YUREKA PLUS

ChangeLog—

1. Switched to the latest sources released by CyanogenMod i.e., the Nightly one. *NEW
2. Merged the latest CM updates into the source. *NEW
3. Improved Hardware CRC32 algorithm for ARMv8 (faster than the normal one).
4. Backported zRAM from Linux 4.1. *NEW
5. Backported zsmAlloc from Linux 4.1. *NEW
6. BUG-Fixes and Improvements to zBud and zPool. *NEW
7. Tons of BUG-Fixes and Improvements to F2FS. *NEW
8. Tons of BUG-Fixes and Improvements to Interactive Governor. *NEW
9. Improvements to GPU-Frequency Mechanism (should improve Gaming-Performance). *NEW
10. Tons of BUG-Fixes and Improvements to Vibration Module and Intensity Control. *NEW
11. BUG-Fixes and Improvements to Colour Enhancement. *NEW
12. Support for Qualcomm Sunlight Readability Enhancement (SRE). *NEW
13. Fixed DT2W on AOSParadox ROM (use the OLD type of v11.2 with this ROM as it is using old sources).
14. Full Support for Offline Gestures. *NEW
15. Removed Hack from ThunderCharge (Now, you need to use ThunderZap App to control Charge Rate. This is done because I believe that the hack broke the Charge Rate Toggle.). *NEW
16. Support for using all 8 cores while booting (should improve Boot-Time).
17. Raised the default Max. Charging Current from 900mAh to 1000mAh (should improve Charging-Time). *NEW
18. Minor BUG-Fixes and Improvements.       

NOTE---

Only AutoSMP HotPlug is there because---

1. it can replicate the behaviour of AluCard HotPlug if we set Max. Cores to 4 and set the Max. Freq. of big Cluster to 1113MHz

2. it can replicate the behaviour of ClusterPlug if we set the Max. Cores to 4

3. it can act as a normal HotPlug switching cores online/offline based on CPU-Load and User-Preferences

Download Link--- 
Now, I have switched to a better Ad-Supported Website for Downloads. All you need to do now is wait for 5 seconds and then click on Skip this Ad button which will take you directly to the download page reaching which you are to press the blue download button to start the download. 

For AOSParadox and MM ROMs with Offline Gesture Support---
http://sh.st/AuoUS

For LP ROMs and those MM ROMs in which you want DT2W to work---
http://sh.st/AiXDP 

Only for MM ROMs and that too only for those which are based on the latest sources i.e., the Nightly one--- 
http://sh.st/AeppQ 



Recommended Settings---
Click Here!

ENJOY!!! ;)

VELOCITY KERNEL (64-BIT) V11.2 FOR YU YUPHORIA

ChangeLog—

1. Re-Built from scratch i.e., the base of the kernel has been revised and improved.
2. Switched to the latest sources provided by CM i.e., the Nightly one (contains improvements to WiFi, Display, Sound, etc.).
3. Full Support for F2FS (up-to-date F2FS Driver).
4. Full Support for KEXEC with HARDBOOT.
5. Improved the LiveDisplay Driver (several BUG-Fixes and improvements).
6. Improved the BFQ Scheduler with support for Hierarchical Scheduling.
7. Support for Offline Gestures (need to be implemented in the ROM too).
8. Minor BUG-Fixes and Improvements.

Download Link (Monetized. If you feel my work is appreciable and want to boost my motivation, then please use this link. It is simple, just follow the instructions. )—

Instructions—

1. As soon as you click this link, a page will open with a “Skip this Ad” button at the top-right corner (shows up after a count of 5 seconds).
2. You need to click that button which opens a new window.
3. Now, the main thing is to close that new window before it fully loads as only that new window leads to more ads.

http://linkshrink.net/7sV5Wg

Download Link (Direct)—

http://d-h.st/uIBC

Note—

For DT2W, the old script is still required. Although, I can enable it by default but then you people won’t be able to disable it. So, the functionality via the script is better.

Recommended Settings—

I don’t own the device so honestly I can’t tell what’s good. You people have to experiment yourselves.

Reason for removal of certain main features—

1. Governors—

Only AluCard and Darkness Governors are there. These both are Battery-Oriented ones and are regarded as the best. For performance, no governor can match the new Interactive Governor.

2. HotPlugs—

Only AutoSMP is there. Since SD410 is a quad-core SoC, too many HotPlugs are unnecessary. Further, AutoSMP is quite good too.

3. Overclock—

I’ll add it later. By the way, the kernel is quite smooth already.

VELOCITY KERNEL (64-BIT) V2.0 FOR YU YUTOPIA

ChangeLog—

1. Switched to the latest Marshmallow sources released by Cyanogen.
2. Fixed Boot-Loop finally (Tested by Mohit Makhija).
3. Updated F2Fs to the latest version i.e., v4.4.
4. Support for exFAT FileSystem.
5. Minor BUG-FIxes and Improvements.

Note—

This BUILD is only for Marshmallow based ROMs.

Download Link (Monetized. If you feel my work is appreciable and want to boost my motivation, then please use this link. It is simple, just follow the instructions. )—

Instructions—

1. As soon as you click this link, a page will open with a “Skip this Ad” button at the top-right corner (shows up after a count of 5 seconds).
2. You need to click that button which opens a new window.
3. Now, the main thing is to close that new window before it fully loads as only that new window leads to more ads.

http://linkshrink.net/7bZBKx

Download Link (Direct)—

http://d-h.st/bOBV

VELOCITY KERNEL (64-BIT) V11.1 FOR YU YUREKA/YUREKA PLUS

ChangeLog—

1. Re-Built from scratch i.e., the base of the kernel has been revised and improved.
2. Switched to a new source (contains improvements to WiFi, Display, Sound, etc.).
3. Improved Hardware CRC32 algorithm for ARMv8 (faster than the normal one).
4. Full Support for F2FS (up-to-date F2FS Driver).
5. Full Support for KEXEC with HARDBOOT.
6. Improved the LiveDisplay Driver (several BUG-Fixes and improvements). *NEW
7. Full Support for the latest version of Colour Enhancement (a new and improved implementation to make colours look vibrant with more contrast). *NEW
8. Support for Kernel-CPUSets.
9. Fixed implementation of C and M Gestures (earlier, there values were swapped i.e., M was C and vice-versa). *NEW
10. Energy-Efficient and IntelliGent Task Allocation System (more of the tasks will be performed by LITTLE Cluster except for extreme loads such as gaming thereby reducing heat and saving a lot of Battery). *NEW
11. Improved IDLE-Battery usage (IDLE-Battery Drain should be almost Zero). *NEW
12. Improved the BFQ Scheduler with support for Hierarchical Scheduling.
13. System-Wide tweaks to improve the smoothness of kernel.
14. Fixed Vibration Intensity Control.
15. Fixed WestWood+ TCP Congestion Algorithm.
16. Improved compatibility with ROMs i.e., Torch Toggle won’t disappear after flashing the kernel. *NEW
17. Minor BUG-Fixes and Improvements.

Download Link (Monetized. If you feel my work is appreciable and want to boost my motivation, then please use this link. It is simple, just follow the instructions. )—

Instructions—

1. As soon as you click this link, a page will open with a “Skip this Ad” button at the top-right corner (shows up after a count of 5 seconds).
2. You need to click that button which opens a new window.
3. Now, the main thing is to close that new window before it fully loads as only that new window leads to more ads.

http://linkshrink.net/7eos0W

Download Link (Direct)—

http://d-h.st/t4bs

Recommended Settings—

Click Here

Reason for removal of certain main features—

1. Governors—

Only AluCard and Darkness Governors are there. These both are Battery-Oriented ones and are regarded as the best. For performance, no governor can match the new Interactive Governor.

2. HotPlugs—

Only AutoSMP and AluCard HotPlugs are there. AutoSMP can disable the LITTLE cluster completely and AluCard can disable big cluster. So, both of these can perform all the hotplugging tasks.

3. Overclock—

After a lot of testing, I can confidently say that on Yureka, OCs don’t increase performance. In fact, they decrease it. The main reason for this is the heat-issue of SnapDragon 615 processors.